User Manual of DS-7200-ST Series DVR
103
Configuring HDD Alarms
HDD alarms can be set to trigger when an HDD is uninitialized or in an abnormal state.
To set HDD alarms:
1. Click Menu > Settings > Exception to enter Exception menu, shown in Figure 8.
Figure 8. Exception Menu
2. Select HDD Error under Exception Type.
3. Select trigger action. Trigger actions are further explained in Understanding Exception Trigger
Options.
Note: The Trigger Alarm Output option is invalid for DS-7200HVI-ST/SE, DS-7200HFI-ST/SE,
DS-7200HVI-ST/SN and DS-7200HFI-ST/SN models as they provide no alarm in/out.
To Next Page
Loading...
Need help?
General