User Manual of DS-7200-ST Series DVR
67
the video clip during playback.
3. Repeat for additional clips.
4. Click the Quit Playback button to exit from the Playback interface. You’ll then be prompted to
save the clips, as shown in Figure 8.
Figure 8. Video Clips Saving Prompt
5. Click the Yes button to enter Backup interface or select No to exit Playback interface.
6. At the Backup interface, select the Start button to begin the Backup process.
• By Using the Front Panel / Remote:
1. Enter the Playback interface (See Video Playback).
2. During playback, press the EDIT button to mark start of clip.
3. Press the EDIT button again to mark end of clip.
4. Repeat for additional clips.
5. Press the ESC button to exit from the Playback interface. You’ll then be prompted to save the
clips, as shown in Figure 6.
6. Click the Yes button to enter Backup interface or select No to exit Playback interface.
7. At the Backup interface, select the Start button to begin the Backup process.
Managing Backup Devices
To manage backup devices, you must first be in the Export menu, shown in Figure 9. The Export menu can be
accessed by following the steps shown in the previous section (See Exporting Files).
Figure 9. Export Menu
Once in the Export menu, you may:
• Create New Folder: Creates a new folder on the export device.
• Delete: Delete a file or folder from the export device.
• Play: Play the selected video file from the export device.
• Format: Format the export device.
• Erase: Erase files from a re-writable CD/DVD.
To Next Page
Loading...
Need help?
General