User Manual of DS-7200-ST Series DVR
109
• Remote Configuration: Remotely configure parameters, restore parameters to factory
defaults and import settings to as well as export settings from DVR.
• Remote Serial Port Control: Configure settings for RS232 and RS485 ports.
• Remote Video Output Control: Configure settings for video output.
• Two-way Audio: Permission to use two-way radio between the remote client and the DVR.
• Remote Alarm Control: Remote alert or control the relay output of the DVR. Alarm and
exception settings must be configured properly to upload to host.
• Remote Advanced Operation: Remotely manage hard disk drives (initializing and setting
properties for HDDs). Permission to remotely update system firmware and stop relay output.
• Remote Shutdown/Reboot: Remotely shut down or reboot the DVR.
9. Click on the Camera Permission tab to configure channel permission, as shown in Figure 8. The
channel settings include:
Figure 8. Camera Permission Settings Menu
• Remote Live View: Select and view live video over the network.
• Local Manual Record: Locally start and stop manual recording on any of the channels.
• Remote Record Starting: Remotely start and stop manual recording on any of the channels.
• Local Playback: Locally play recorded files that are on the DVR.
• Remote Playback: Remotely play and download recorded files that are on the DVR.
• Local PTZ Control: Locally control PTZ cameras.
• Remote PTZ Control: Remotely control PTZ cameras.
• Local Video Export: Locally backup recorded files from any of the channels.
10. Click the OK button to save and exit menu.
Note: If you forget the password to your DVR, contact your supplier with the serial number of your DVR to
obtain a secure code to reset your DVR.
Deleting a User
To delete a user from the DVR:
1. Click Menu > Settings > User to enter the User Settings menu.
2. Select user to delete.
3. Click the Delete button to delete user.
4. Click the OK button to exit menu.
Note: No deletion is allowed for the Administrator.