HIKVISION iDS-9600NXI-I16/4F Series User Manual

Figure 7-6 Face Picture Comparison
4. Select Mode as Stranger.
5. Oponal: Check Enable Non-Real-Time Mode. For places with a high ow of people, the device
processing speed may not be fast enough, Non-Real-Time Mode will save the real-me pictures
as cache, and process them later when engine has free resource.
Aer enabling this funcon, all
channels will be able to support face picture comparison.
Note
●
When Non-Real-Time Mode is enabled, the linkage method will only support Nofy
Surveillance Center.
●
Non-Real-Time Mode will not trigger real-me alarm, so Arming Schedule is unavailable.
●
You can search the comparison event results in File Management → Smart Search → Face
Search → Search by Event .
6. Check Enable Stranger.
7.
Oponal: Check Save VCA Picture to save the captured pictures of VCA detecon. Aer the face
picture comparison is enabled, the comparison results will be uploaded for face comparison
alarm. If the comparison produced a match, both the real-me face picture and the target
picture from the library will be uploaded. If no match is produced, the
real-me face picture is
uploaded to center only.
Network Video Recorder User Manual
88

HIKVISION iDS-9600NXI-I16/4F Series Specifications

General

Brand	HIKVISION
Model	iDS-9600NXI-I16/4F Series
Category	Network Hardware
Language	English