User Manual of Network Video Recorder
107
14.9 Account Management
The default user name and password of device administrator are “admin” and “12345”. Administrator can add,
delete users or distribute authority for users. There are two user levels: user and operator.
Note: For “Remote Configuration” permission, operator has the permission of “Two-way Audio”, while user
doesn’t; for “Channel Configuration” permission, operator has all the permissions, while user only has the local
playback and remote playback permissions.
Steps:
1. Enter User Management interface:
Configuration> Remote Configuration> User Management
Figure 14. 6 User Information List
2. You can check user information there, including User Name and Level.
3. Click Add to add user.
Figure 14. 7 Basic Permission Management Interface
4. You can configure basic permissions by checking the checkbox of corresponding option.
5. Click Camera Configuration tab to configure the detail permission of every single channel. Click to
expand the tab.
To Next Page
Loading...
Need help?
General
