User Manual of Network Video Recorder
92
Steps:
1. Check the checkbox of disk.
2. Configure its property by selecting R/W, Read-Only or Redundancy from drop-down menu.
3. Click the Set button to save the settings.
Table 12. 1 Disk Property Description
Writing in and reading from this disk is allowed when selecting this option.
Unable to write in this disk to protect existed recordings from being overwritten
when selecting this option.
Redundant recording in this disk is allowed when selecting this option to double
secure the data.
Note: Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular
HDD group through HDD settings. You can refer to the User Manual of iVMS-4200 for detailed information.
12.1.3 HDD Sleeping
Purpose:
The HDD sleeping function can switch the HDD into sleeping status to reducing the consumption when there is no
need to read or write.
Steps:
1. Enter HDD Advanced Settings interface.
Configuration> HDD Management > Advanced
Figure 12. 3 HDD Sleeping Setting
2. Check the checkbox of Enable HDD Sleeping and click the Save button.
To Next Page
Loading...
Need help?
General
