User Manual of Network Video Recorder
51
8.4 Configuring Video Loss
Steps:
1. Enter video loss settings interface
Configuration> Remote Configuration> Camera Settings> Video Loss
Figure 8. 6 Video Loss Settings
2. Select the channel number for video loss.
3. Check the checkbox to enable video loss detection.
4. Click Edit button to edit arming schedule. Please refer to step 3 of Chapter 8.1 Configuring Alarm Input.
5. Click tab Linkage Method to edit linkage method.
Figure 8. 7 Video Loss Linkage Method Settings
Check the checkbox to activate the linkage method; you may refer to Table 8. 1 for details of linkage
methods.
Note: This function is only available on IP cameras from our manufacturer.
To Next Page
Loading...
Need help?
General
