User Manual of Network Video Recorder
30
6.1 Manual Recording and Capturing
Before you start:
The channel for recording and capturing should be in the live view mode.
Note: When the live view of the current channel is stopped, the recording or the capturing of this channel will be
stopped as well.
6.1.1 Manual Recording
Click icon to start recording of this channel, if the icon does not change to , it will pop up note message
“Recording failed”. When the recording is on, click to stop recording.
When multiple channels are in live view mode, you may click to start recording for all the channels, or click
to stop recording for all the channels.
Note: If the free disk space is less than 500M, the web server will stop recording automatically.
You can refer to Chapter 13 Local Configuration to edit the recording saving directory.
6.1.2 Manual Capturing
Select a live view window, click to capture image.
Note: If the free space of the saving file disk is less than 500M, capture image will be failed.
You can refer to Chapter 13 Local Configuration to edit the capture image saving directory.
To Next Page
Loading...
Need help?
General
