Need help?Do you have a question about the HIKVISION Network Digital Video Recorder and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | Network Digital Video Recorder |
| Category | Network Hardware |
| Language | English |
Step-by-step guide for powering the NVR on and off safely.
Guide to configuring IP address, subnet mask, gateway, and port using SADP.
Instructions for installing the necessary plug-in for web browser access and remote management.
Adding and managing IP cameras for live view and recording.
Navigating and controlling the live video feed, including window division and audio.
Operating PTZ cameras, including using the control panel and managing presets.
Manually starting and stopping video recording and image capture.
Setting up automated recording and capturing based on a schedule.
Searching and playing recorded video files by time and date.
Performing local and remote backups of recorded data.
Setting up and configuring alarm input channels and their schedules.
Setting up motion detection parameters, areas, and sensitivity.
Configuring fundamental network settings like IP, subnet, gateway, and working modes.
Configuring NAT settings, including UPnP and manual port mapping for remote access.
Setting up RAID arrays and logical disks for data storage and redundancy.
Procedures for rebuilding RAID arrays, both automatically and manually.
Initializing, setting properties, and configuring HDD sleeping for local drives.
To Next Page