User Manual of Network Video Recorder
91
12.1 Local HDD Settings
12.1.1 Disk Initializing
Steps:
1. Enter HDD Management Settings interface.
Configuration> HDD Management > Basic Settings
Figure 12. 1 Local Disk Management(1)
2. Check the checkbox of HDD No..
3. Click the Format button to initialize the disk.
Note: Initializing the HDD will erase all the data saved on it, please backup the data before formatting hard disk
if necessary.
4. The status changes from Uninitialized to Normal.
Figure 12. 2 Local Disk Management(2)
12.1.2 Disk Property Management
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings. You can refer to the User Manual of iVMS-4200 for detailed information.
Before you start:
Make sure you have set the storage mode to Group before configuring the HDD property. You may refer to the
User Manual of iVMS-4200 for detailed information.
To Next Page
Loading...
Need help?
General
