User Manual of Network Video Recorder
87
11.4 Deleting Array / Logical Disk
Note: Before deleting the array, the logical disk(s) existing under this array must be deleted first. Deleting array
and logical disk will delete all the data saved in the disk.
11.4.1 Deleting the Logical Disk
Steps:
1. Enter the Logical Disk interface.
Device Management> Remote Management> HDD >Array Configuration> Logical Disk
Figure 11. 20 Logical Disk Interface
2. Select a logical disk and click Delete button to delete the logical disk.
Figure 11. 21 Confirm Logical Disk Deletion
3. In the pop-up message box, click the Yes button to confirm the logical disk deletion.
Note: Deleting logical disk will delete all the data saved in the disk.
11.4.2 Deleting the Array
Note: You can delete the array only after all the logical disks under that array have been deleted.
Steps:
1. Enter the Array Settings interface.
Device Management> Remote Management> HDD >Array Configuration> Array
To Next Page
Loading...
Need help?
General
