User Manual of Network Video Recorder
31
6.2 Schedule Recording and Capturing
Note: In this section, we take the record schedule procedure as an example, and the same procedure can be
applied to configuring schedule for both recording and capture. To schedule the automatic capture, you need
to choose the Capture tab in the Schedule interface.
Steps:
1. Enter Schedule Settings interface:
Configuration> Remote Configuraion> Camera Settings> Schedule Settings
2. Select the camera to configure the record schedule.
3. Check the checkbox of Enable Record Schedule.
Note: When NVR succeeds to connect to IP camera, it will start schedule recording which means recording
for 24*7 hours by default.
Figure 6. 1 Schedule Recording Configuration
4. Click Edit button to enter setup page.
Figure 6. 2 Schedule Editing Interface
1) Choose the day in a week to configure scheduled recording.
To Next Page
Loading...
Need help?
General
