2 - 71
*Upgrade procedures of an Instruction manual please refer to [2.3.4 Upgrade of Instruction
Manual].
4. Recover the system files Recover the system files to PC from [TM3000_Backup]
folder on desktop.
*In the case of not installing the adjustment data, TM3000 application is not start.
*System files are different data every devices such as factory adjustment data. Do not use it
other than serial number device printed by the disk surface. When it is used for a different
device, it is not worked device original performance. In addition, troubles may happen by
that.
2.4.3 Output Log Data
Click [Output log data] from main menu of TM3000 Setup disk, log data of TM3000 is output
to desktop. Use the system log for a device to diagnose a device state when malfunction
occurred.
The name of system log is [Log data YYYYMMDDHHMMSS] (the present time)
2.4.4 About TM3000 Application
Clicking [About TM3000 application] from main menu of TM3000 Setup disk, version note of
TM3000 application program is displayed.
It can be confirm the version of TM3000 application program.
2.4.5 Exit
Clicking [Exit] from main menu of TM3000 Setup disk, exit the program of TM3000 Setup
Tools.
To Next Page
Loading...
Need help?
General
