SAFETY - 12
For the Safe Handling of the System
To Avoid Serious Property Damage or Damage to the System
(continued)
NOTICE
About Network Connection
For network connection, the PC is equipped with an Ethernet port. As connecting to the network
through the use of Ethernet requires sufficient knowledge on the network environment, perform
such a connection by consulting your network administrator.
(1) Providing a cable connection to the Ethernet port must be performed by either the system
installer or a service engineer. For these services, contact either the sales department
handling your account or the Service Department.
(2) When connecting the PC to a network, be sure to take adequate anti-computer virus
measures. For details, see the [About the computer virus] section in this chapter.
(3) The system is not supplied with an Ethernet cable; an appropriate cable should be
procured.
(4) Any change in settings for network connection should be performed with care.
Unwittingly changing the settings necessary for the operation of the system can render
the system inoperative.
(5) Do not install any special software necessary for network connection. Uninstalling it can
adversely impact the system or cause the system to fail to operate normally.
To Next Page
Loading...
Need help?
General
