2.2 Setting up the PC
2.2.1 Installing an Application
NOTE
: Before installing an application, check the following precautions:
1. For installation, log on as Administrator.
2. Install the application before connecting the system main unit to the PC via the
USB.
3. Do not change the language of Regional Setting. If the language of OS and the
language of Regional Setting are different, the error message is displayed.
Main unit
USB cable PC
Figure 2.2.1-1 Connecting the Main Unit to the PC
1. Turn on the PC. Log in as “TM3000USER”. If no other user settings have been added, a
login window does not appear, in which case move to the next step.
2. Load the setup disk on the CD/DVD drive.
3. Auto Play menu is displayed on the window. Click [Run SETUP.exe].
Figure 2.2.1-2 AutoPlay
2 - 2
To Next Page
Loading...
Need help?
General
