OPERATOR'S STATION
1-74
EMERGENCY EXIT
Escape from the cab in emergency in the following methods:
CAUTION: The danger of downfall is always present
when escaping from the cab in emergency, possibly
resulting in serious personal injury. Escape from the
cab as safely as possible, depending on the posture of
machine and the outside situation.
1. Open the cab door. Escape through the door.
2. If the cab door should be difficult to open or use, open
the upper front window. Escape through the window.
NOTE:
•
Emergency exit decals (2) are affixed to the front and
rear windows.
•
See page “OPENING UPPER FRONT WINDOW” for the
opening method of the upper front window.
CAUTION:
•
If decal (3) is affixed to the front window glass, the
glass can be broken. However if decal (3) is not af-
fixed to the front window glass, the glass cannot
be broken.
•
Take care not to be injured with pieces of broken
glass.
3. If upper front window should be difficult to open, check
decal (3) affixed to the window glass.
If decal (3) is affixed to the front window glass, break the
front window glass using emergency evacuation tool
(1) installed the cab left side. Then escape through the
broken window.
4. If decal (3) is not affixed to the front window glass, or if
the front window is not available for escaping, break the
rear window glass using emergency evacuation tool (1).
Then escape through the broken window.
5. If neither of front and rear windows are available for
emergency exit, open the overhead window to escape
from the cab.
2
M1U4-01-012
2
M1U1-01-115
3
3
1
M1U1-01-022
To Next Page
Loading...
Need help?
General
