OPERATING THE MACHINE
5-3
ATTACHMENT PEDAL (HYDRAULIC CRUSHER)
(OPTIONAL)
Machine stability, applicable hydraulic oil pressure and oil
quantity for crusher, etc. must be examined when selecting a
crusher.
Be sure to consult your authorized dealer when selecting a
crusher.
For operational instructions, refer to the crusher instruction
manual.
Operation
The crusher can be operated using attachment pedal (1)
located on the right front of the seat, as illustrated.
CAUTION: Be sure to lock attachment pedal (1) with
pedal lock (2) when attachment pedal (1) is not in use.
1. Select the hydraulic crusher icon on monitor work mode
selection screen (3). Refer to the descriptions about the
work mode on page 5-9 for work mode selecting proce-
dures.
2. Move pedal lock (2) forward to unlock attachment pedal
(1).
3. Push down on attachment pedal (1) either forward or
backward to open or close the crusher.
4. Remove foot from attachment pedal (1) to stop the
crusher.
5. Always keep attachment pedal (1) locked with pedal lock
(2) when attachment pedal (1) is not in use.
M1U1-05-008
T1V5-05-01-109
1
3
M1J1-13-012
1
2
Locked Attachment Pedal
M1J1-13-006
1
2
Unlocked Attachment Pedal
Fully Tighten the
Stopper Bolt
To Next Page
Loading...
Need help?
General
