SAFETY
S-10
EQUIPMENT OF HEAD GUARD, ROPS, FOPS
In case the machine is operated in areas where the possibility
of falling stones or debris exist, equip a head guard, ROPS, or
FOPS according to the potential hazardous conditions. (The
standard cab for this machine corresponds to ROPS and FOPS.)
ROPS: Roll-Over Protective Structure
FOPS: Falling Object Protective Structure
PROVIDE SIGNALS FOR JOBS INVOLVING MUL-
TIPLE NUMBERS OF MACHINES
•
For jobs involving multiple numbers of machines, provide
signals commonly known by all personnel involved. Also,
appoint a signal person to coordinate the job site. Make
sure that all personnel obey the signal person’s directions.
018-E01A-0481
CONFIRM DIRECTION OF MACHINE TO BE DRIVEN
•
Incorrect travel pedal/lever operation may result in serious
injury death.
• Before driving the machine, confirm the position of the
undercarriage in relation to the operator’s position. If the
travel motors are located in front of the cab, the machine
will move in reverse when travel pedals/levers are oper-
ated to the front.
017-E01A-0491
SA-490
SA-481
SA-491
To Next Page
Loading...
Need help?
General
