Hitachi ZAXIS 180-3 class User Manual

OPERATOR'S STATION
1-40
•
When more than two items apply
1. If turning the key switch to the ON position, the starting
screen displays. Then, the scheduled maintenance screen
for the items whose change interval has expired displays
for three to ten seconds. Finally the basic screen displays.
NOTE: For a machine which the basic screen is displayed ac-
cording to a password on, the scheduled maintenance
screen for the items whose change interval has expired
displays for three to ten seconds, after the password is
input successfully and the determination key is pushed.
And then the basic screen displays.
2. If data is reset, while the scheduled maintenance screen
is displayed, select desired item by using keys 1 and 2
. Push the determination key. Then, the maintenance
information display screen for the selected item displays.
(In the right example, Hydraulic Oil is selected.)
NOTE: When pushing the back key while the scheduled main-
tenance screen is displayed, the basic screen displays.
3. Push the reset key while the maintenance information
display screen is displayed.
The message “Reset Data. OK?” displays. Then, push the
determination key.
The value of remaining hours is reset to that of change
interval. Previous change date/hour is updated with cur-
rent date and time.
NOTE: When pushing the back key while the maintenance
information display screen is displayed, return to the
scheduled maintenance screen.
NOTE: When pushing the back key while the reset screen is dis-
played, return to the maintenance information display
screen.
Determination
Key
Back Key
Key 1
Key 2
T1V1-05-01-115
Starting Screen
Reset Key
Back Key
Back Key
Maintenance Information Display Screen
T1V5-05-01-170
T1V5-05-01-171
Reset Screen
T1V5-05-01-169
Scheduled Maintenance Screen

Hitachi ZAXIS 180-3 class Specifications

General

Brand	Hitachi
Model	ZAXIS 180-3 class
Category	Excavators
Language	English