xiv
About This Document
This document provides instructions for accessing, configuring, and operating the
Performance Series IP cameras. This document is intended for system installers,
administrators, and operators.
Overview of Contents
This document contains the following chapters and appendixes:
• Chapter 1, Introduction, provides an overview of the main features of the Performance
Series IP cameras.
• Chapter 2 , Accessing the Camera, describes how to install the Unified Tool to access the
camera remotely from a web browser. It also describes how to update your camera’s
firmware.
• Chapter 3, Logging In and Viewing Live Video, describes how to log in to a camera and the
Live View interface.
• Chapter 4, Playing Back Video, describes how to search for recorded video and snapshots
and how to export them (Note This function is not supported by model HBW2PER1V).
• Chapter 5, Configuring Camera Settings, describes camera configurations.
• Chapter 6, Configuring Network Settings, describes network configurations.
• Chapter 7, Configuring Video Analytics Settings, describes video analytics configurations.
• Chapter 8, Configuring Storage Settings, describes storage configurations.
• Chapter 9, Configuring System Settings, describes general system configurations.
• Chapter 10, Viewing System Information, describes system information, such as version,
log and online user information.
• Chapter 11, Configuring Alarms Settings, describes how to set up notifications for alarm
inputs, motion detection, and network failure events.
• Chapter 12, Troubleshooting, lists common problems and solutions.
• Chapter 13, Appendix, lists maximum frame rate and resolution when integrating
Performance Series IP cameras with Honeywell Embedded NVRs and lists the
descriptions of symbols.
• Chapter 14, Specifications, lists the specifications of the Performance Series IP cameras.
To Next Page
Loading...
Need help?
General
