Configuring Camera Settings
31
Snapshot
Go to Setup Camera Setup Video Snapshot.
Figure 5-6 Snapshot
Table 5-2 Snapshot Configurations
Parameter Function
Snapshot Type
Select from either General (schedule) or Event (activation).
General: Snapshots are taken according to a user-defined
schedule.
Event: Snapshots are taken whenever an alarm, motion
detection, camera tampering, or system event occurs.
Image Size
The image size is determined by the main stream resolution
setting. It is not configurable.
Quality
Set the Quality to a value between 1 (lowest) and 6
(highest).
Interval
Select a snapshot frequency between 1 snapshot per
second (1s) and 7 snapshots per second (7s), or click
Customized to define a custom setting between 1 and
50,000 seconds.
Note
See Path on page 33 for information about configuring where
snapshots are saved. Snapshots are saved as JPEGs.
Video Overlay
Go to Setup Camera Setup Video Overlay.
To Next Page
Loading...
Need help?
General
