Honeywell H4W2PER2 Series User Manual

Configuring Storage Settings
69
Table 8-1 Path Configurations
Parameter Function
Event Type Select Scheduled, Motion Detection, or Alarm.
Local Select to save files to the microSD card
SFTP Select to save files to the SFTP server.
NAS Select to save files to the NAS disk.
Local
If the camera has a microSD card installed, the Local tab displays the microSD card details.
Note This function is not supported by model HBW2PER1V.
Figure 8-4 Local Storage
You can set up the installed microSD card for read-only, read-and-write, or hot swap
operation by clicking the corresponding button.
• Read Only: Data on card can be displayed but not modified.
• Read & Write: Data on card can be displayed and modified.
• Hot Swap: Card can be inserted or removed without turning off the camera.
If you want to erase all the data on the microSD card, click Format. A confirmation message
appears. Click OK to continue. The card is formatted and the camera reboots.
SFTP
On the SFTP tab, you can enable the SFTP storage function. When enabled, event-triggered
video and snapshots (either scheduled or motion detection, depending on what you chose in
Figure 8-3) will be saved to the specified SFTP server.

Honeywell H4W2PER2 Series Specifications

General

Brand	Honeywell
Model	H4W2PER2 Series
Category	Security Camera
Language	English