Performance Series IP Camera Software Configuration Guide
16
4 Playing Back Video
This chapter contains the following sections:
• Introduction, page 16
• Playing Back Recorded Video, page 17
• Us
ing the Playback Assistant, page 20
• Cr
eating a Video Clip, page 20
• V
iewing Snapshots, page 21
Note This function is not supported by model HBW2PER1V.
Introduction
This chapter describes how to play back recorded video and saved snapshots on cameras
using the web client, how to zoom in and take snapshots while playing back recorded video
using the Playback Assistant, and how to create custom video clips.
N
ote
Before you can play back recorded video or saved snapshots,
you must first configure storage settings in the Setup menu.
See Configuring Storage Settings on page 67.
Click the Playback tab to display the playback interface.