- 1 -
1. Overview
1.1 Introduction
The IPC5000 is a universal programmable microprocessor-based, a single loop or two-loop
controller. It has a typical accuracy of ± 0.10 % of span, two analog control loops, 12 digital
inputs and outputs, 100 programs and 2000 segments. The IPC5000 is an ideal control
solution for furnaces, dryers and environmental chambers, corrosion testing chambers, lab
ovens, sterilizers and other processes with similar control requirements.
1.2 Feature Summary
z IPC5000D support two mode; Synchronous and Asynchronous mode
- Synchronous: depending on TIME each loop
- Asynchronous mode: independent on time each loop
z 1 or Up to 2 loops, including:
- Proportional Integral Derivative (PID),
- ON/OFF and,
- Heating/Cooling control
z Auto tuning for each control loop and automatic tuning for all zones (Max. 8 zones).
z Up to 36 different selection for 2 analog inputs
z 2 universal control output (Voltage pulse, Current (4~20mA), Relay)
z 12 digital inputs and 12 digital outputs
z Up to 100 programs, total 2000 segments
z Easy operator interface by touch screen and graphic displays by LCD.
z Universal Power(100 to 240 VAC) or 37 VA
z Ethernet communication (Option)
z Y2K compliant
<IPC5000S>
z Up to 36 selection for 1 analog input
To Next Page
Loading...
Need help?
General
