ID3000/ID2000 Fire Panel Configuration Tool Manual
Introduction
1 - 8 997-291, Version 3.05
November 2010
Panel Menu (continued)
c. Edit Current Panel Options. Displays the
Modify System Options window (same as
the Create New Panel Configuration window
but for an existing panel).
d. Import Panel Configuration. Used to convert
a configuration file produced by the DOS
Tool into the format used by this windows
Tool, for subsequent use with panel software
version 4. The file to be converted is selected
via a standard windows Open window. A
further window allows selection of the
database into which the file is to be saved.
If the DOS file is for a Master/Slave
network and the new configuration is
to be ID
2
net, refer to Section 6.3.1 before
you begin.
Note: Use the Files of type drop-down list to
select ID2000 (.id2) or ID3000 (.id3)
configuration files.
Note: Type ‘.id3’: If the maximum zone number
in the DOS file is less than 255, the Tool
assumes the panel is an ID2000. A
warning is displayed with an option to
convert the configuration to an ID3000
panel or leave it as an ID2000.
To Next Page
Loading...
Need help?
General
