ID3000/ID2000 Fire Panel Configuration Tool Manual
Control Matrix
4 - 16 997-291, Version 3.05
November 2010
EDIT MENU APPLIES TO HIGHLIGHTED LINE. OPTIONS
ARE ALSO AVAILABLE VIA THE RIGHT MOUSE BUTTON.
SEE
APPENDIX
3
4.2 Review/Edit Control Matrix Entries
Select ‘Control Matrix’ from the System
Parameters menu. The Control Matrix Input and
Output Rules window is displayed. In the example
opposite, the only entries are the defaults (see
Section 4.1.1).
4.2.1 Review Entries
To view the existing Rules, either use the scroll
bars or place the cursor in the Rule column
and use the keyboard up and down arrow keys.
4.2.2 Amend/Create/Delete Entry
Highlight an existing rule (to amend or delete)
or an empty line (to create a new entry). Select
the appropriate option from the Edit menu:
a. Add/Replace Input Event, to change the
rule’s input or create a new rule. See
Section 4.3.1.
b. Replace Output Event, to change the rule’s
output. See Section 4.3.2, which also
describes the time-of-day and timer
options.
c. Delete Rule, to delete the input and output.
d. Copy Rule - use if an input or an output is
to occur again in another rule.
Click OK to accept edited Rules, or Cancel to
reject them. The Cut and Paste Rule options
allow rules to be moved (for ease of reading.
There is no effect on the Control Matrix
operation).
IF YOU DO NOT AMEND OR DELETE
THE PANEL’S DEFAULT ENTRIES
(SECTION 4.1.1), THEY WILL
OVERRIDE ANY CREATED ENTRIES.
To Next Page
Loading...
Need help?
General
