Displaying RMON event logs
If you configure the system to log an event after the event is triggered
when you configure the event group, the event is recorded in the RMON
log. Perform this task to display the details of the log table.
Configuring a statistics entry
1. Select Device > RMON from the navigation tree.
The Statistics tab page appears.
Figure 80 Statistics entry
2. Click Add.
Figure 81 Adding a statistics entry
3. Configure a statistic entry as described in Table 24.
4. Click Apply.
Table 24 Configuration items
Item Descri
Interface Name
Select the name of the interface on which the statistics entry is created.
Only one statistics entry can be created on one interface.
Owner Set the owner of the statistics entry.
To Next Page
Loading...
Need help?
General
