HP 1920 Gigabit Ethernet Switch Series User Manual

138
Ste
p
Remarks
3. Setting the PVID for a port.
Configure the PVID of the
trunk port.
Required.
A trunk port has only one
untagged VLAN and the
untagged VLAN is its PVID.
The three operations produce
the same result, and the latest
operation takes effect.
By default, the untagged
VLAN of a trunk port is VLAN
1.
When you change the
untagged VLAN (PVID) of a
trunk port, the former untagged
VLAN automatically becomes a
tagged VLAN of the trunk port.
4. Configure the trunk port as an untagged
member of the specified VLANs:
a. Selecting VLANs
Specify the range of VLANs available for
selection during related operations.
Configure a subset of all existing VLANs.
This step is required before you perform
operations on the Detail, Modify VLAN,
and Modify Port tabs.
b. Modifying a VLAN
C
onfigure the trunk port as an untagged
member of the specified VLANs.
N/A
5. Modifying ports.
Configure the untagged
VLAN of the trunk port.
6. Configure the trunk port as a tagged
member of the specified VLANs:
a. Selecting VLANs
S
pecify the range of VLANs available for
selection during related operations.
Configure a subset of all existing VLANs.
This step is required before you perform
operations on the Detail, Modify VLAN,
and Modify Port tabs.
b. Modifying a VLAN
C
onfigure the trunk port as a tagged
member of the specified VLANs.
N/A
Required.
A trunk port can have multiple
tagged VLANs. You can
repeat these steps to configure
multiple tagged VLANs for the
trunk port.
7. Modifying ports.
Configure the tagged
VLAN of the trunk port.
Recommended configuration procedure for assigning a hybrid
port to a VLAN
Ste
p
Remarks
1. Creating VLANs.
Required.
Create one or multiple VLANs.
2. Configuring the link type of a port.
Optional.
Configure the link type of the port as hybrid.
To configure a trunk port as a hybrid port, first
configure it as an access port.
If you configure multiple untagged VLANs for a trunk
port at the same time, the trunk port automatically
becomes a hybrid port.
By default, the link type of a port is access.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English