HP 1920 Gigabit Ethernet Switch Series User Manual

137
Recommended VLAN configuration procedures
Recommended configuration procedure for assigning an
access port to a VLAN
Ste
p
Remarks
1. Creating VLANs.
Required.
Create one or
multiple VLANs.
2. Configuring the link type of a port.
Optional.
Configure the link type of the port as access.
By default, the link type of a port is access.
3. Setting the PVID for a port.
Configure the PVID of the
access port.
Required.
An access port has only
one untagged VLAN and
the untagged VLAN is its
PVID. The three operations
produce the same result,
and the latest operation
takes effect.
By default, an access port
is an untagged member of
VLAN 1.
4. Configuring the access ports as untagged
members of a VLAN:
a. Selecting VLANs
S
pecify the range of VLANs available for
selection during related operations.
Configure a subset of all existing VLANs.
This step is required before you perform
operations on the Detail, Modify VLAN,
and Modify Port tabs.
b. Modifying a VLAN
C
onfigure the access ports as untagged
members of the specified VLAN.
N/A
5. Modifying ports.
Configure the untagged
VLAN of the port.
Recommended configuration procedure for assigning a trunk
port to a VLAN
Ste
p
Remarks
1. Creating VLANs.
Required.
Create one or
multiple VLANs.
2. Configuring the link type of a port.
Optional.
Configure the link type of the port as trunk.
To configure a hybrid port as a trunk port, first configure it
as an access port.
By default, the link type of a port is access.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English