61
Configuring syslog
System logs record network and device information, including running status and configuration changes.
With system logs, administrators can take corresponding actions against network problems and security
problems.
The system sends system logs to the following destinations:
• Console
• Monitor terminal, a terminal that has logged in to the device through the AUX or VTY user interface
• Log buffer
• Log host
• Web interface
• Log file
Displaying syslogs
1. Select Device > Syslog from the navigation tree.
The page for displaying syslogs appears. You can click Reset to clear all system logs saved in the
log buffer on the Web interface. You can click Refresh to manually refresh the page, or you can
set the refresh interval on the Log Setup page to enable the system to automatically refresh the
page periodically. For more information, see "Setting buffer capacity and refresh interval."
Figure 50 Displaying syslogs
2. View system logs.
To Next Page
Loading...
Need help?
General
