HP 1920 Gigabit Ethernet Switch Series User Manual

46
Verifying the configuration
To verify the stack topology on Switch A:
1. Select Stack from the navigation tree of Switch A.
2. Click the Topology Summary tab.
Figure 35 Verifying the configuration
Configuration guidelines
When you configure a stack, follow these guidelines:
• If a device is already configured as the master device of a stack, you cannot modify the private IP
address pool on the device.
• If a device is already configured as a member device of a stack, the Global Settings area on the
member device is not available.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English