HP 1920 Gigabit Ethernet Switch Series User Manual

162
Item Descri
p
tion
Voice VLAN port state
Select Enable or Disable in the list to enable or disable the voice VLAN function
on the port.
Voice VLAN ID Set the voice VLAN ID of a port when the voice VLAN port state is set to Enable.
Select Ports
Select the port on the chassis front panel.
You can select multiple ports to configure them in bulk. The numbers of the
selected ports will be displayed in the Ports selected for voice VLAN field.
NOTE:
To set the voice VLAN assignment mode of a port to automatic, you must make
sure that the link type of the port is trunk or hybrid, and that the port does not
belong to the voice VLAN.
Adding OUI addresses to the OUI list
1. Select Network > Voice VLAN from the navigation tree.
2. Click the OUI Add tab.
Figure 152 Adding OUI addresses to the OUI list
3. Add an OUI address to the list as described in Table 51.
4. Click Apply.
Table 51 Configuration items
Item Descri
p
tion
OUI Address Set the source MAC address of voice traffic.
Mask Set the mask length of the source MAC address.
Description Set the description of the OUI address entry.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English