HP 1920 Gigabit Ethernet Switch Series User Manual

115
Item Descri
p
tion
Location Set a character string to describe the physical location of the device.
SNMP Version Set the SNMP version run by the system.
Configuring an SNMP view
Creating an SNMP view
1. Select Device > SNMP from the navigation tree.
2. Click the View tab.
The View tab appears.
Figure 102 View tab
3. Click Add.
The Add View window appears.
Figure 103 Creating an SNMP view (1)
4. Type the view name.
5. Click Apply.
The page in Figure 104 ap
pears.
6. Configure the parameters as described in Table 34.
7. Cli
ck Add to add the rule into the list box at the lower part of the page.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English