1-5
General Information
Weight and Dimensions
Original Packaging. Containers and materials identical to those used
in factory packaging are available from Hewlett-Packard offices. If the
instrument is being returned to Hewlett-Packard for servicing, attach a
tag indicating the type of service required, return address, model
number, and full serial number. Mark the container FRAGILE to ensure
careful handling. In any correspondence, refer to the instrument by
model number and full serial number.
Other Packaging. The following general instructions should be
followed when repackaging with commercially available materials:
• Wrap instrument in heavy paper or plastic. If the instrument is being
shippedto Hewlett-Packard,attach a tag indicating the type of service
required, return address, model number and full serial number.
• Use a strong shipping container. A double wall carton made of 350
pound test material is adequate.
• Use a layer of shock absorbing material 70 to 100 mm (3 to 4 inch)
thick, around all sides of the instrument to provide firm cushioning
and prevent movement inside the container. Protect the Front Panel
controls and Rear Panel connectors with cardboard.
• Seal shipping container securely.
• Mark shipping container FRAGILE to ensure careful handling.
• In any correspondence, refer to instrument by model number and full
serial number.
Weight and Dimensions
Weight: 18 kg (40 lb) fully loaded
Dimensions: 190mm (7.5in) high, 340mm (14in) wide, 420mm (17in)
deep (including cover).
To Next Page
Loading...
Need help?
General
