1-6
General Information
Safety Precautions for the Operator
Safety Precautions for the Operator
The following general safety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards of design, manufacture, and
intended use of the instrument. Hewlett-Packard Company assumes no
liability for the customer’s failure to comply with these requirements.
In particular, the operator should note the following safety information:
• “Safety Symbols” on page 1-7
• “Connecting to the Power Supply” on page 2-4
• “Operating Environment” on page 2-2
• “Fuse Replacement” on page 2-3
• “Operators Maintenance” on page 1-8
• “Lifting/Carrying the HP 37718A/19A” on page 1-6
DO NOT operate damaged equipment: Whenever it is possible that the
safety protection features built into this product have been impaired,
either through physical damage, excessive moisture, or any other reason,
REMOVE POWER and do not use the product until safe operation can be
verified by service-trained personnel. If necessary, return the product to
a Hewlett-Packard Sales and Service Office for service and repair to
ensure the safety features are maintained.
Lifting/Carrying the HP 37718A/19A
Before attempting to lift or carry the instrument consider the following basic lifting
techniques to help avoid personal injury.
Using both arms to lift instrument.
• Reach for the instrument - bend your knees and waist, and keep your back
straight.
• GRASP the instrument firmly.
• LIFT with your legs.
• KEEP your shoulders level.
To Next Page
Loading...
Need help?
General
