118
Configuring parameters for saving the running configuration
Before the running configuration is saved manually or automatically, the file path and filename prefix must be
configured. After that, the system saves the running configuration with the specified filename (filename
prefix_serial number.cfg) to the specified path. The filename of a saved configuration file is like
20080620archive_1.cfg, or 20080620archive_2.cfg. The saved configuration files are numbered
automatically, from 1 to 1,000 (with an increment of 1). If the serial number reaches 1,000, it restarts from 1.
If you change the path or filename prefix, or reboot the device, the saved file serial number restarts from 1,
and the system recounts the saved configuration files. If you change the path of the saved configuration files,
the files in the original path become common configuration files, and are not processed as saved
configuration files, and are not displayed when you view saved configuration files.
The number of saved configuration files has an upper limit. After the maximum number of files is saved, the
system deletes the oldest files when the next configuration file is saved.
To Next Page
Loading...
Need help?
General
