21
To modify the command level:
Ste
Command
Remarks
Enter system view system-view —
Configure the command level in a
specified view
command-privilege level level view
view command
Required
See Table 1 for the default settings.
Saving the current configuration
On the device, enter the save command in any view to save all submitted and executed commands into the
configuration file. Commands saved in the configuration file can survive a reboot. The save command does
not take effect on one-time commands, such as display commands, which display specified information, and
reset commands, which clear specified information. The one-time commands executed are never saved.
Displaying and maintaining CLI
Task Command Remarks
Display defined command aliases and
the corresponding commands.
display command-alias [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the clipboard information.
display clipboard [ | { begin | exclude |
include } regular-expression ]
Available in any view
To Next Page
Loading...
Need help?
General
