HP FlexNetwork MSR 954 User Manual

152
•
RFC 3446, Anycast Rendezvous Point (RP) mechanism using Protocol Independent Multicast
(PIM) and Multicast Source Discovery Protocol (MSDP)
MSDP configuration task list
Tasks at a glance
Configuring basic MSDP features:
• (Required.) Enabling MSDP
• (Required.) Specifying an MSDP peer
• (Optional.) Configuring a static RPF peer
Configuring an MSDP peering connection:
• (Optional.) Configuring a description for an MSDP peer
• (Optional.) Configuring an MSDP mesh group
• (Optional.) Controlling MSDP peering connections
Configuring SA message-related parameters:
• (Optional.) Enabling multicast data encapsulation in SA messages
• (Optional.) Configuring the originating RP of SA messages
• (Optional.) Configuring SA request messages
• (Optional.) Configuring SA message policies
• (Optional.) Configuring the SA cache mechanism
Configuring basic MSDP features
All the configuration tasks in this section should be performed on RPs in PIM-SM domains, and each
of these RPs acts as an MSDP peer.
Configuration prerequisites
Before you configure basic MSDP features, complete the following tasks:
•
Configure a unicast routing protocol so that all devices in the domain can interoperate at the
network layer.
•
Configure PIM-SM to enable intra-domain multicast.
Enabling MSDP
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enable IP multicast routing
and enter MRIB view.
multicast routing
[
vpn-instance
vpn-instance-name ]
By default, IP multicast routing is
disabled.
3. Return to system view.
quit
N/A
4.
Enable MSDP and enter
MSDP view.
msdp
[
vpn-instance
vpn-instance-name ]
By default, MSDP is disabled.

HP FlexNetwork MSR 954 Specifications

General

Brand	HP
Model	FlexNetwork MSR 954
Category	Network Router
Language	English