HP FlexNetwork MSR 954 User Manual

322
(3001::1, FF3E::101)
RP: 1003::2
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet1/0/2
Upstream neighbor: 3002::1
RPF prime neighbor: 3002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1
Protocol: mld, UpTime: 00:13:25, Expires: -
MLD proxying configuration example
Network requirements
As shown in Figure 90:
•
IPv6 PIM-DM runs on the core network.
•
Host A and Host C on the stub network receive VOD information sent to IPv6 multicast group
FF3E::101.
Configure the MLD proxying feature on Router B so that Router B can maintain group memberships
and forward IPv6 multicast traffic without running IPv6 PIM-DM.
Figure 90 Network diagram
Configuration procedure
1. Assign an IPv6 address and prefix length to each interface, as shown in Figure 90. (Details not
shown.)
2. Enable IPv6 multicast routing, IPv6 PIM-DM, MLD, and MLD proxying:
# On Router A, enable IPv6 multicast routing.
<RouterA> system-view
[RouterA] ipv6 multicast routing
[RouterA-mrib6] quit
# Enable IPv6 PIM-DM on GigabitEthernet 1/0/2.
[RouterA] interface gigabitethernet 1/0/2
[RouterA-GigabitEthernet1/0/2] ipv6 pim dm
Proxy & Querier
Router B
Querier
Router A
Host B
Receiver
Host A
Receiver
Host C
GE1/0/1
2001::1/64
GE1/0/1
2001::2/64
GE1/0/2
3001::1/64
GE1/0/2
1001::1/64
IPv6 PIM-DM

HP FlexNetwork MSR 954 Specifications

General

Brand	HP
Model	FlexNetwork MSR 954
Category	Network Router
Language	English