HP FlexNetwork MSR 954 User Manual

272
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2.
Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
interface
interface-type
interface-number
N/A
3. Configure an IPv6 multicast
group policy for the port.
mld-snooping group-policy
ipv6-acl-number [
vlan
vlan-list ]
By default, no IPv6 multicast
group policies exist on a port, and
hosts attached to the port can join
any IPv6 multicast groups.
Enabling IPv6 multicast source port filtering
This feature is supported only on the following ports:
•
Layer 2 Ethernet ports on HMIM-8GSW, HMIM-24GSW, and HMIM-24GSW-PoE.
•
Fixed Layer 2 Ethernet ports on the following routers:
 MSR1002-4/1003-8S.
 MSR2004-24/2004-48.
 MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
 MSR958 (JH300A/JH301A).
This feature enables the device to discard all IPv6 multicast data packets and to accept IPv6
multicast protocol packets. You can enable this feature on ports that connect to only IPv6 multicast
receivers.
You can enable multicast source port filtering for the specified ports in MLD-snooping view or for a
port in interface view. For a port, the configuration in interface view has the same priority as the
configuration in MLD-snooping view, and the most recent configuration takes effect.
Enabling IPv6 multicast source port filtering for the specified ports
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter MLD-snooping view.
mld-snooping
N/A
3.
Enable IPv6 multicast
source port filtering globally.
source-deny port
interface-list
By default, IPv6 multicast source
port filtering is disabled globally.
Enabling IPv6 multicast source port filtering for a port
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter Layer 2 Ethernet
interface view.
interface
interface-type
interface-number
N/A
3.
Enable IPv6 multicast
source port filtering on the
port.
mld-snooping source-deny
By default, IPv6 multicast source
port filtering
is disabled on the
port.
Enabling dropping unknown IPv6 multicast data
This feature is supported only on the following ports:

HP FlexNetwork MSR 954 Specifications

General

Brand	HP
Model	FlexNetwork MSR 954
Category	Network Router
Language	English