HP FlexNetwork MSR 954 User Manual

291
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Configure a static IPv6
multicast MAC address
entry.
mac-address multicast
mac-address
interface
interface-list
vlan
vlan-id
By default, no static IPv6
multicast MAC address entries
exist.
To configure a static IPv6 multicast MAC address entry in interface view:
Step Command Remarks
1. Enter system view.
system-view
N/A
2.
Enter Layer 2 Ethernet
interface or
Layer 2
aggregate interface view.
interface
interface-type
interface-number
N/A
3. Configure a static IPv6
multicast MAC address
entry.
mac-address multicast
mac-address
vlan
vlan-id
By default, no static IPv6
multicast MAC address entries
exist.
Enabling IPv6 multicast forwarding between sub-VLANs of a
super VLAN
A super VLAN is associated with multiple sub-VLANs. Sub-VLANs are isolated with each other at
Layer 2. For information about the super VLAN and sub-VLANs, see Layer 2—LAN Switching
Configuration Guide.
To enable IPv6 multicast forwarding between sub-VLANs that are associated with a super VLAN:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter VLAN interface view.
interface vlan-interface
interface-number
N/A
3.
Enable IPv6 multicast
forwarding between
sub-
VLANs that are
associated with
a super
VLAN.
ipv6
multicast forwarding
supervlan community
By default, IPv6 multicast data
cannot be forwarded among
sub-VLANs that
are associated
with a super VLAN.
4. Delete
all IPv6 multicast
forwarding entries with super
VLAN interface as the
incoming interface.
reset ipv6 multicast
[
vpn-instance
vpn-instance-name ]
forwarding-table
{ { ipv6-source-address
[ prefix-length ] |
ipv6-group-address
[ prefix-
length ] |
incoming-interface
{ interface-type
interface-number } } * |
all
}
N/A

HP FlexNetwork MSR 954 Specifications

General

Brand	HP
Model	FlexNetwork MSR 954
Category	Network Router
Language	English