EasyManuals Logo
Home>HP>Network Router>FlexNetwork MSR2003

HP FlexNetwork MSR2003 User Manual

HP FlexNetwork MSR2003
517 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #248 background imageLoading...
Page #248 background image
234
To ping a link-local address, use the –i parameter to specify an interface for the link-local address.
[RouterB] ping ipv6 -c 1 3001::1
Ping6(56 data bytes) 3001::2 --> 3001::1, press CTRL_C to break
56 bytes from 3001::1, icmp_seq=0 hlim=64 time=4.404 ms
--- Ping6 statistics for 3001::1 ---
1 packet(s) transmitted, 1 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 4.404/4.404/4.404/0.000 ms
[RouterB] ping ipv6 -c 1 2001::15B:E0EA:3524:E791
Ping6(56 data bytes) 3001::2 --> 2001::15B:E0EA:3524:E791, press CTRL_C to break
56 bytes from 2001::15B:E0EA:3524:E791, icmp_seq=0 hlim=64 time=5.404 ms
--- Ping6 statistics for 2001::15B:E0EA:3524:E791 ---
1 packet(s) transmitted, 1 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 5.404/5.404/5.404/0.000 ms
The output shows that Router B can ping Router A and the host. The host can also ping Router B and
Router A (output not shown).
IPv6 ND suppression configuration example
Network requirements
As shown in Figure 91, the base station, Router A, and Router B are in an MPLS L2VPN. The base
station can reach the L3VE interface L3VE1 of Router B.
Enable IPv6 ND suppression on Router A to directly answer ND packets for Router B.
Figure 91 Network diagram
Configuration procedure
1. Configure IPv6 addresses for the interfaces as shown in Figure 91. Make sure the base station
can reach the L3VE interface of Router B. (Details not shown.)
2. Configure IPv6 ND suppression:
# Create a cross-connect group named vpna.
<RouterA> syatem-view
[RouterA] xconnect-group vpna
# Create a cross-connect named svc.
[RouterA-xcg-vpna] connection svc
# Enable IPv6 ND suppression for the cross-connect svc in cross-connect group vpna.
[RouterA-xcg-vpna-svc] ipv6 nd suppression enable
Verifying the configuration
1. On the base station, clear the ND suppression entries, and ping the L3VE interface VE-L3VPN
1 of Router B. (Details not shown.)
2. Verify that Router A has ND suppression entries for the base station and Router B.
[RouterA-xcg-vpna-svc] display ipv6 nd suppression xconnect-group
L3VE1
2001::3/64
Router A Router BBase station
GE2/0/1
2001::1/64
GE2/0/1
2001::2/64
GE2/0/2
1::1/64
GE2/0/2
1::2/64

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP FlexNetwork MSR2003 and is the answer not in the manual?

HP FlexNetwork MSR2003 Specifications

General IconGeneral
BrandHP
ModelFlexNetwork MSR2003
CategoryNetwork Router
LanguageEnglish

Related product manuals