HP FlexNetwork MSR2003 User Manual

21
Step Command Remarks
5. Return to cross-connect
group view.
quit
N/A
6. Return to system view.
quit
N/A
7. (Optional.) Enable the
ARP suppression push
function and set a push
interval.
arp suppression push interval
interval
By default, the ARP suppression push
function is disabled.
Displaying and maintaining ARP suppression
Execute display commands in any view and reset commands in user view.
Task Command
Display ARP suppression entries (centralized
devices in standalone mode).
display arp suppression xconnect-group
[
name
group-name ] [
count
]
Display ARP suppression entries (distributed
devices in standalone mode/centralized devices
in IRF mode).
display arp suppression xconnect-group
[
name
group-name ] [
slot
slot-number ] [
count
]
Display ARP suppression entries (distributed
devices in IRF mode).
display arp suppression xconnect-group
[
name
group-name ] [
chassis
chassis-number
slot
slot-number ] [
count
]
Clear ARP suppression entries (centralized
devices in standalone mode).
reset arp suppression xconnect-group
Clear ARP suppression entries (distributed
devices in standalone mode/centralized devices
in IRF mode).
reset arp suppression xconnect-group
[
name
group-name ] [
slot
slot-number ]
Clear ARP suppression entries (distributed
devices in IRF mode).
reset arp suppression xconnect-group
[
name
group-name ] [
chassis
chassis-number
slot
slot-number ]
ARP suppression configuration example
Network requirements
As shown in Figure 9, the base station, Router A, and Router B are in an MPLS L2VPN. The base
station can reach the L3VE interface VE-L3VPN 1 of Router B.
Enable ARP suppression on Router A to directly reply to ARP requests for Router B.
Figure 9 Network diagram

HP FlexNetwork MSR2003 Specifications

General

Brand	HP
Model	FlexNetwork MSR2003
Category	Network Router
Language	English