HP FlexNetwork MSR2003 User Manual

246
Step Command Remarks
6. (Optional.) Specify a
temporary IPv6 address
range.
temporary address range
start-ipv6-address
end-ipv6-address
[
preferred-lifetime
preferred-lifetime
valid-lifetime
valid-lifetime ]
By default, no temporary IPv6
address range is specified, and
the DHCPv6 server cannot
assign temporary IPv6
addresses.
7. (Optional.) Create a static
binding.
static-bind address
ipv6-address/addr-prefix-length |
duid
duid [
iaid
iaid ]
[
preferred-lifetime
preferred-lifetime
valid-lifetime
valid-lifetime ]
By default, no static binding is
configured.
To add more static bindings,
repeat this step.
Configuring network parameters assignment
In addition to IPv6 prefixes and IPv6 addresses, you can configure up to eight DNS server addresses,
one domain name suffix, eight SIP server addresses, and eight SIP server domain names in an
address pool.
You can configure network parameters on a DHCPv6 server by using one of the following methods:
• Configure network parameters in a DHCPv6 address pool.
• Configure network parameters in a DHCPv6 option group, and reference the option group in a
DHCPv6 address pool.
Network parameters configured in a DHCPv6 address pool take precedence over those configured
in a DHCPv6 option group.
Configuring network parameters in a DHCPv6 address pool
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Create a DHCPv6 address
pool and enter its view.
ipv6 dhcp pool
pool-name
By default, no DHCPv6
address pool exists on the
DHCPv6 server.
3. Specify an IPv6 subnet for
dynamic assignment.
network
prefix/prefix-length
[
preferred-lifetime
preferred-lifetime
valid-lifetime
valid-lifetime ]
By default, no IPv6 subnet is
specified.
4. (Optional.) Specify a DNS
server address.
dns-server
ipv6-address
By default, no DNS server
address is specified.
5. (Optional.) Specify a domain
name suffix.
domain-name
domain-name
By default, no domain name
suffix is specified.
6. (Optional.) Specify a SIP
server address or domain
name.
sip-server
{
address
ipv6-address |
domain-name
domain-name }
By default, no SIP server
address or domain name is
specified.
7. (Optional.) Configure a
self-defined DHCPv6 option.
option
code
hex
hex-string
By default, no self-defined
DHCPv6 option is
configured.

HP FlexNetwork MSR2003 Specifications

General

Brand	HP
Model	FlexNetwork MSR2003
Category	Network Router
Language	English