UEFI Shell Command Definition
ping Ping a target machine with UEFI network stack
reconnect Reconnects one or more UEFI drivers to a device
reset Resets the system
rm Deletes one or more files or directories
salproc Make a SAL procedure call
secconfig View/configure system security features
sermode Sets serial port attributes
set Displays or modifies UEFI Shell environment variables
setsize Set the size of a file
shift Shifts batch file input parameter positions
smbiosview Displays SMBIOS information
stall Stalls the processor for the specified number of microseconds
tapeboot Boot from tape
tftp Perform TFTP operation
time Displays or changes the current system time
timezone Displays or sets time zone information
touch Updates filename timestamp with current system date and time
type Displays file contents
unload Unloads a UEFI driver
ver Displays UEFI Firmware version information
vol Displays or changes a file system volume label
xchar Turn on/off extended character features
Drive paths in UEFI
Devices in the server blade are represented by device paths in the UEFI shell. Each internal SAS drive
could be configured either as:
• RAID mode
• HBA (raw) mode
Drive paths in UEFI 145
To Next Page
Loading...
Need help?
General