Installing the latest firmware using HP Smart Update
Manager
The HP Smart Update Manager (HP SUM) utility enables you to deploy firmware components from either
an easy-to-use interface or a command line. It has an integrated hardware discovery engine that
discovers the installed hardware and the current versions of firmware in use on target servers. This
prevents extraneous network traffic by only sending the required components to the target. HP SUM also
has logic to install updates in the correct order and ensure all dependencies are met before deployment
of a firmware update. It also contains logic to prevent version-based dependencies from destroying an
installation and ensures updates are handled in a manner that reduces any downtime required for the
update process. HP SUM does not require an agent for remote installations.
Key features of HP SUM are:
• GUI and CLI–command line interface
• Dependency checking, which ensures appropriate installation order and dependency checking
between components
• Intelligent deployment deploys only required updates
• Support for updating firmware on network-based targets, such as the OA, iLO (through the Network
Management Port), and VC Ethernet modules
• Improved deployment performance
• Remote command-line deployment
• Windows X86 or Linux X86 support
HP SUM is included in the firmware bundles download from
http://www.hpe.com, and is supported on
the BL860c i4, BL870c i4, and BL890c i4.
For more information about HP SUM, see the HP Smart Update Manager User Guide (http://
www.hpe.com/info/hpsum/documentation).
34 Installing the latest firmware using HP Smart Update Manager
To Next Page
Loading...
Need help?
General