Loading media
The following sections describe how to load media into the different input trays.
CAUTION: Printing on wrinkled, folded, or damaged media can cause jams. See
Guidelines for using media
on page 16 for more information.
Loading documents to copy or scan
Use these instructions to load originals into the device for scanning.
1. Lift the flatbed scanner cover.
2. Place the original document face-down on the flatbed scanner with the upper-left corner of the
document at the lower-right corner of the glass.
3. Gently close the lid.
The document is ready to be copied or scanned.
Loading input trays
Priority input tray
The priority input tray on the HP LaserJet M1005 MFP holds up to 10 sheets of media up to 80 g/m
2
(20 lb) in
weight or one envelope, transparency, or card. Load media with the top forward and the side to be printed
facing up. To prevent jams and skewing, always adjust the side media guides before feeding the media.
24 Chapter 4 Using the device ENWW
To Next Page
Loading...
Need help?
General
