EasyManuals Logo
Home>HP>All in One Printer>LaserJet M1005 MFP

HP LaserJet M1005 MFP User Manual

HP LaserJet M1005 MFP
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Critical error messages
Critical error messages can indicate some kind of failure. Restarting the device might fix the problem. If a
critical error persists, the device might require service.
Critical error message tables
Control panel message Description Recommended action
50.1 Fuser Error Turn off then on The device has experienced an internal
hardware error.
1. Turn off the power by using the power
switch, and then wait at least 30 seconds.
2. If a surge protector is being used, remove
it. Plug the device directly into the wall
socket.
3. Turn on the power and wait for the device
to initialize.
If the error persists, contact HP Customer Care.
See the support flyer that came in the device
box.
50.2 Fuser Error Turn off then on The device has experienced an internal
hardware error.
Turn off the power by using the power switch,
wait at least 30 seconds, and then turn on the
power and wait for the device to initialize.
If a surge protector is being used, remove it.
Plug the device directly into the wall socket.
Use the power switch to turn the device on.
If the error persists, contact HP Customer Care.
See the support flyer that came in the device
box.
50.3 Fuser Error Turn off then on The device has experienced an internal
hardware error.
Turn off the power by using the power switch,
wait at least 30 seconds, and then turn on the
power and wait for the device to initialize.
If a surge protector is being used, remove it.
Plug the device directly into the wall socket.
Use the power switch to turn the device on.
If the error persists, contact HP Customer Care.
See the support flyer that came in the device
box.
50.8 Fuser Error Turn off then on The device has experienced an internal
hardware error.
Turn off the power by using the power switch,
wait at least 30 seconds, and then turn on the
power and wait for the device to initialize.
If a surge protector is being used, remove it.
Plug the device directly into the wall socket.
Use the power switch to turn the device on.
If the error persists, contact HP Customer Care.
See the support flyer that came in the device
box.
ENWW Control-panel messages 81

Table of Contents

Other manuals for HP LaserJet M1005 MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP LaserJet M1005 MFP and is the answer not in the manual?

HP LaserJet M1005 MFP Specifications

General IconGeneral
BrandHP
ModelLaserJet M1005 MFP
CategoryAll in One Printer
LanguageEnglish

Related product manuals