Cleaning the device
To clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the device.
To clean the scanner glass
Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects the accuracy of
special features such as fit-to-page and copy.
1. Turn off the device, unplug the power cord from the electrical socket, and raise the lid.
2. Clean the glass by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on
any part of the device; these can damage the device. Do not place liquids directly on the glass. They
might seep under it and damage the device.
3. To prevent spotting, dry the glass by using a chamois or cellulose sponge.
To clean the lid backing
Minor debris can accumulate on the white document lid backing that is located underneath the scanner lid.
1. Turn off the device, unplug the power cord from the electrical socket, and raise the lid.
2. Clean the white document lid backing by using a soft cloth or sponge that has been moistened with a
mild soap and warm water.
3. Wash the backing gently to loosen debris; do not scrub the backing.
ENWW Cleaning the device 67
To Next Page
Loading...
Need help?
General
