B-32
Monitoring and Analyzing Switch Operation
Traffic Mirroring
8. Press the Space bar to select Monitor for the port(s) and/or trunk(s) that
you want mirrored. Use the down arrow key to move from one interface
to the next in the Action column. (If any trunks are configured, they will
appear at the end of the port listing.)
9. When you finish selecting interfaces to mirror, press [Enter], then press
[S]
(for S
ave) to save your changes and exit from the screen.
10. Return to the Main Menu.
Switch Configuration - Network Monitoring Port
Monitoring Enabled [No] : Yes
Monitoring Port : D5
Monitor : Ports
Port Type Action | Port Type Action
---- --------- + ------- | ---- --------- + -------
D1 1000X | | D14 1000X |
D2 1000X | | D15 1000X |
D3 1000X | | D16 1000X |
D4 1000X | | 1 1000T |
D5 1000X | | 2 1000T |
D6 1000X | | 3 1000T |
D7 1000X | | 4 1000T |
D8 1000X | | S1 |
Actions-> Cancel Edit Save Help
Select whether to monitor the selected port.
Use arrow keys to change field selection, <Space> to toggle field choices,
and <Enter> to go to Actions.
Use the down arrow key to select the interface(s)
whose traffic you want to mirror to the local exit port.
To Next Page
Loading...
Need help?
General